This 3D figurine of Crawling Xenomorph consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
WHAT WILL YOU GET AFTER PURCHASE?
- 4 versions of Crawling Xenomorph STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
- STL files of high-poly Crawling Xenomorph Figurine for 3D printing consist of 52 files;
- Sizes for:
- FFF/FDM: 275 mm tall, 178 mm wide, 269 mm deep;
- DLP/SLA/SLS: 138 mm tall, 89 mm wide, 134 mm deep;
- Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
- Detailed settings that we provide as a recommendation for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer for the best print;
- Full technical support from the Gambody Support Team.
Detailed information about this 3D printing model is available in the DESCRIPTION section.
 | |||||
|---|---|---|---|---|---|
| File Name | File Size | Time / Filament | Object Size (x/y/z mm) | ||
| 1_solid_head_FDM(repaired ).stl | 47.71 MiB | 9 h 4 min 5 m | 30 x 78 x 75 | Download | |
| 2_head_with_skull_inside_ FDM(repaired).stl | 51.00 MiB | 9 h 33 min 5 m | 29 x 74 x 75 | Download | |
| 3_top_head_with_skull_ins ide_FDM(repaired).stl | 17.67 MiB | 3 h 56 min 3 m | 25 x 98 x 32 | Download | |
| 4_small_jaws_FDM(repaired ).stl | 12.37 MiB | 7 min <1 m | 6 x 6 x 16 | Download | |
| 5_body_FDM(repaired).stl | 61.77 MiB | 17 h 28 min 11 m | 51 x 58 x 112 | Download | |
| 6_arm_R_1_FDM(repaired).s tl | 22.33 MiB | 1 h 48 min 1 m | 62 x 33 x 31 | Download | |
| 7_arm_R_2_FDM(repaired).s tl | 21.85 MiB | 1 h 11 min 1 m | 15 x 27 x 65 | Download | |
| 8_hand_R_FDM(repaired).st l | 16.09 MiB | 43 min <1 m | 25 x 26 x 30 | Download | |
| 9_arm_L_1_FDM(repaired).s tl | 22.65 MiB | 1 h 49 min 1 m | 22 x 67 x 30 | Download | |
| 10_arm_L_2_FDM(repaired). stl | 22.59 MiB | 1 h 13 min 1 m | 15 x 28 x 65 | Download | |
| 11_hand_L_FDM(repaired).s tl | 12.84 MiB | 44 min <1 m | 25 x 24 x 33 | Download | |
| 12_leg_R_1_FDM(repaired). stl | 22.99 MiB | 6 h 46 min 4 m | 42 x 99 x 62 | Download | |
| 13_leg_R_2_FDM(repaired). stl | 22.68 MiB | 2 h 5 min 1 m | 44 x 21 x 83 | Download | |
| 14_leg_L_1_FDM(repaired). stl | 21.47 MiB | 6 h 31 min 4 m | 41 x 100 x 61 | Download | |
| 15_leg_L_2_FDM(repaired). stl | 21.98 MiB | 2 h 17 min 1 m | 34 x 47 x 85 | Download | |
| 16_spike_1_FDM(repaired). stl | 14.24 MiB | 42 min <1 m | 11 x 14 x 55 | Download | |
| 17_spike_2_FDM(repaired). stl | 14.41 MiB | 44 min <1 m | 18 x 14 x 55 | Download | |
| 18_spike_3_FDM(repaired). stl | 14.62 MiB | 34 min <1 m | 10 x 11 x 50 | Download | |
| 19_spike_4_FDM(repaired). stl | 14.95 MiB | 39 min <1 m | 14 x 12 x 50 | Download | |
| 20_tail_1_FDM(repaired).s tl | 20.99 MiB | 9 h 56 min 6 m | 33 x 56 x 110 | Download | |
| 21_tail_2_FDM(repaired).s tl | 20.86 MiB | 7 h 58 min 5 m | 23 x 90 x 78 | Download | |
| 22_tail_3_FDM(repaired).s tl | 19.47 MiB | 4 h 25 min 3 m | 53 x 29 x 90 | Download | |
| 23_tail_4_FDM(repaired).s tl | 19.65 MiB | 4 h 49 min 3 m | 21 x 89 x 150 | Download | |
| 24_platform_FDM(repaired) .stl | 71.94 MiB | 106 h 14 min 57 m | 179 x 178 x 113 | Download | |
| 25_ge_lock_10H(x1)_FDM(re paired).stl | 0.03 MiB | 4 min <1 m | 10 x 18 x 2 | Download | |
| Keychain (repaired).stl | 0.35 MiB | 23 min <1 m | 30 x 30 x 2 | Download | |
| Tag (repaired).stl | 1.70 MiB | 1 h 18 min 1 m | 150 x 18 x 5 | Download | |
| ... | |||||
Sending to ...
This should take overall.
ABOUT THIS 3D MODEL
Extraterrestrial species Xenomorphs from Alien vs. Predator are known for their hostility and bloodlust. Aliens strike enormous terror on their victims - these two-meter tall creatures with sharp claws, strong tails, elongated heads with an inner jaw, and acid for blood are born to kill and destroy. The terrifying story of a space tug Nostromo crew being surrounded by endoparasitoid extraterrestrial species Xenomorphs was taken as a basis for numerous film adaptations, video games, and comics and contributed to the development of the horror genre as a whole.
Crawling Xenomorph is a new work of our contributing 3D artists, and it is very special as its design and level of detail are incredible. The chosen posture of the figurine perfectly showcases the unusual body build of the monster, and the most outstanding feature of the Crawling Xenomorph is its semi-transparent head with the skull inside - the view of the screaming Alien is mesmerizing. The long flexible tail of the monster with a large, knife-like blade at the tip is among its best offensive weapons and the author put a lot of effort into shaping it. Don't wait to explore the STLs of the STLs of Crawling Xenomorph as their quality and design are top-level!
ADAPTATION FOR 3D PRINTING
Crawling Xenomorph for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 67 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the creature to be depicted harmoniously in the intended pose.
The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Xenomorph was divided into convenient assembly parts.
All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Crawling Xenomorph.
The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.
The figurine’s scale was calculated from the height of Xenomorph. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.
VERSIONS’ SPECIFICATIONS
FFF/FDM 1.0 versions features:
- Contains 25 parts;
- A printed figurine is 275 mm tall, 178 mm wide, 269 mm deep;
- 2 variants of the head - solid and divided into 2 parts to print the upper part with a transparent filament to show the detail under it;
- All parts are divided in such a way that you will print them with the smallest number of support structures.
DLP/SLA 1.0 versions features:
- Contains 12 parts;
- A printed figurine is 138 mm tall, 89 mm wide, 134 mm deep;
- 2 variants of the head - solid and divided into 2 parts to print the upper part with a transparent filament to show the detail under it;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.
DLP/SLA Eco 1.0 versions features:
- Contains 12 parts;
- A printed figurine is 138 mm tall, 89 mm wide, 134 mm deep;
- 2 variants of the head - solid and divided into 2 parts to print the upper part with a transparent filament to show the detail under it;
- Some parts are manually hollowed out to save resin.
SLS 1.0 versions features:
- Contains 3 parts - a solid Xenomorph figurine on and separately from the platform.
You can get the figurine of Crawling Xenomorph for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble Crawling Xenomorph 3D Printing Figurine on Gambody YouTube channel.
Also, you may like other AvP and Horror 3D Printing Models.
_______
FAQ:
- Where can I print a model if I have no printer?
- How to get started with 3D printing?
- How to set up my 3D printer?
- How to choose right 3D model print bed positioning?
- How to paint printed figurine?
Generic
Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.
Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.
Note:
You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
All connectors should be printed at 100% Infill.
Bambu Lab printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.
To avoid printing problems, we recommend the following settings: download
Cura printing recommendations:
These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.
To avoid printing problems, we recommend the following settings: download
Simplify3D printing recommendations:
These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.
To avoid printing problems, we recommend the following settings: download
Slic3r printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.
To avoid printing problems, we recommend the following settings: download
PrusaSlicer printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.
To avoid printing problems, we recommend the following settings: download
